If you own a home, you might know that it needs regular repairs to keep it looking beautiful and well-maintained. Homes need constant improvements and renovations as the condition of the home deteriorates over time. You might have to pay attention to the water plumbing, bathroom ceilings, or kitchen floors if they need any repairs. Similarly, another thing that might need renovation is your driveway.
Re-paving your driveway can be a cost-effective job. Therefore, you should consider all your options and the resulting costs before making a decision. The cost of re-paving will depend mainly on the type of material you use and some other additional charges. AdvertisementGet Driveway Estimates at Just
Cost Involved in Repaving a Driveway
If you are planning to have a driveway repaved with asphalt, it can cost between $3,000-$5,500. In this article, we have listed some prices to consider when planning to repave your driveway.
1. Driveway Materials
One of the biggest costs of your driveway project will be the material used. You should look at a few factors before deciding which material to choose for your driveway. Different materials will cost you differently. Also, you should consider the climatic conditions and durability you need for your driveway. The installation cost will vary for different materials. You can choose concrete, asphalt, gravel, bricks, pavers, and more.
When it comes to paving driveways with gravel, they are inexpensive and can cost less than $1,000. However, gravel is cheap and can cause the driveway to deteriorate quickly. On the other hand, driveways made of brick are very expensive. They can cost you up to $9,500 . In addition to the high initial costs, driveways made of brick require high maintenance. Asphalt and concrete are comparable to each other when it comes to price, with concrete being slightly more expensive. Driveway asphalting in Stamford, CT can cost you an average of $4,500. Today’s Homeowner Tip
It would be helpful if you had a complete idea of your requirements and what each material can provide for your needs. Asphalt deteriorates quickly, while concrete is strong. Your choice will depend on usage, cost, and environment.
2. Get rid of the old driveway
Since you are re-paving the driveway, you will need to remove the old one first. It is best to begin your renovation by tearing up the old driveway and removing it. Costs under this area will also include tearing up the old driveway, loading it onto a truck for removal, removing the existing base, and removing the debris. You can assume an average cost of $1–$2 per square foot under this item.
3. Land leveling
Often this is only done when a new driveway is being built. Land leveling means digging and leveling the land before building a driveway. This requires removing trees, plants, grass, etc. that get in the way.
However, it is also useful to consider if this will require re-paving your driveway. It is better to know all your costs before you get involved in the project. If you are changing the area for your driveway, you most likely need to know the land-leveling price. You can get various quotes for these costs from several contractors for a rough estimate. On average, this step will cost you around $1,500 including grading.
4. Grading
The subgrade is the base on which the driveway will be built. So if your existing base is eroded and worn out, you should consider this. The typical expense for grading would be $4 per square foot. The costs under this item would include the removal of rocks, cleaning, setup, grading the soil, and adding grading resources.
5. Cost of permits
If your driveway project only involves rebuilding the existing pavement , you will not have to pay any permit-related costs. However, if you want to increase the size, depth, position, etc., you will have to pay additional fees due to regulations.Today’s Homeowner Tip
You should contact the government in your local area to discuss whether the improvements you make are allowed under the jurisdiction. There are always specific rules and regulations that need to be followed when building a home. Therefore, you will need to check these.
6. Borders for your driveway
Once the driveway is finished, you should create some boundaries for it. You can border your driveway with pavers or bricks. Planting some plants will complete the look, but you need to keep a few points in mind. You can plan all this as a visual design to understand what should be where and how it will be completed.
7. Consider installing a gate
Gates and pillars give an attractive look to your entire home. Adding something to your driveway will increase the value of your property. Barriers also provide extra security. But first, get a quote for the charges it will cost.
conclusion
Repaving a driveway can be expensive only if you don’t manage your costs effectively. Consider all expenses and plan a budget for them. You should know which expenses are necessary and which are negotiable. This will help you create the most suitable cost plan for your driveway according to your needs and desires.